B07WTC6X2T ZHFEISY Welding Equipment – Metal Powder Spray Welding Torch Oxygen Acetylene Flame Welding Gun QH-2/h

Product Specifications: Model: Q-2 / H Nozzle diameter: 3 (1.6 / 1.9 / 2.2) Power speed: 1.0-1.4 / 1.4-1.7 / 1.7-2.0 Length: 470mm Gas type: O2, C2H2 (acetylene) The package includes: 3 x Welding nozzle 1 x The connecting nuts 1 x Powder bucket seat 1 x Powder hopper 1 x Control powder feeder 1 x Powder pressing hand 1 x Oxygen joint 1 x The acetylene joint 1 x The handle 1 x Acetylene handwheel 1 x In the middle of the subject 1 x Oxygen handwheel 1 x Hybrid junction 1 x Mixed gas pipe Note: ?medium pressure structure, must be used for medium pressure acetylene generator and acetylene gas cylinder tube, absolutely not applied to low pressure acetylene generator and pipeline. ?spray gun, if there is no ignition, can not press the powder valve switch to avoid blockage. ?Due to the uneven particle size of the powder or becoming wet, the powder valve switch is disabled and blocked, and should be repaired in time and reused. ?Dry powder must be used. ?Periodically clean the spray gun to avoid obstruction of the tracheal hole. When cleaning the tube hole, pop out and clean the powder feeder. ?Keep the gas pipeline dry and smooth to avoid moisture in the powder. ?all the pipes of the welding torch have no contaminated oil. Prevent oxygen from burning and exploding in the oil. ?At the end of the work, the acetylene valve is first closed, and then the internal pipe of oxygen blowing is used. After cleaning, the welding torch and the hose should be sprayed to prevent the spray nozzle from splashing dust and impurities to normal use. ?using a spray gun, oxygen, acetylene piping must Equipped with anti-tempering device
Make sure this fitsby entering your model number.
? Heat the acetylene flame on the workpiece to 300-400 degrees Celsius.
#3,909,327 in Automotive (See Top 100 in Automotive)#895 in Spot Welding Equipment
08M 23, 2019
0
FALSE