B08S3NGNYN GOGOLO 110V Spot Puller Dent Spotter 3KW Car Body Panel Repair Kit with 2 Welding Guns, 7 Modes Spot Stud Welding Machine Dent Puller

Specifications Input power: 3KW Input the maximum current: 20A Vacuum suction: 396.8lb/180kg Work stalls: 7 channels 63 modes Regular working hours: Automatic mode program setting Welding thickness of single-sided: 0.024~0.047in/0.6~1.2mm Package Content 1* Host 1* Manual 1* Manual sucker 1* Triangle chuck 1* Hook hammer 2* Carbon rods 1* Spanner for wrench 1* Carbon rod connector 10* Triangle straight pull sheet NOTE 1. Ensure that the product is connected to the ground wire and the grounded power cord is in good condition. 2. Ensure that the workbench is connected to the grounding device. 3. Make sure that the operator has no contact with the metal parts to be welded without any protection. 3. Do not work in a very wet place or on a wet floor. 4. Avoid to be in contact with the welding part. 5. Don’t weld with worn out cables. Check that there is no default with the isolation with stripped cables or with loose connections. 6. The connection is released,  the water cooling system leakage and other unsafe factors. 7. Turn off the machine and disconnect the power plug directly before performing all inspections and maintenance. 8. Switch off the unit before replacing the metal parts. 9. Please protect your eyes and wear protection clothes when operate the machine. Please don’t wear the ring, watch etc.
Make sure this fitsby entering your model number.
This welder’s primary role is to repair the dents on the car. Less residue, shinny and clean solder spot after welding. Due to the pulse welding method, the welder makes small but firm welding spot, that means it won’t damage the anti-corrosive paint on the another side of panel.

05-Jan-21
0
FALSE